Tired of the inadequate accuracy of your pre-assembled arrows? Want to take matters into your own hands? Well, you can easily fletch your own arrows to improve the speed and accuracy! How? With a fletching jig of course!
A fletching jig allows you to fletch your own arrows, however, you want! Want to know more? Continue reading!
Here are reviews of Best Fletching Jigs for DIY
The Bitzenburger is a cherished favorite amongst archery enthusiasts and is perfect for archers with all types of skill level. It is extremely easy to use and requires no other tools. The Bitzenberger is crafted out of a die-cast aluminum alloy which grants it durability and sturdiness, ensuring it lasts a long time.
The aluminum construction also makes it easier to scratch off any excess glue off the surface of the jig. In other cases, it might have left scratches across the body and may ruin the whole look of the jig.
The Bitzenburger can easily fletch arrows in three ways: straight, left helical or right helical. These clamps are supported by a strong permanent magnet that allows it to stay in place during the fletching process. It allows you to precisely place your vanes and feathers uniformly.
You can easily adjust the fletching angle by tweaking the dials at the top and the bottom. You can rest assured about the quality of your fletching as the self-centering shaft cradle keeps shafts of any size centered.
The nock receiver can easily be configured according to your preferred angle. However, it can be upgraded as well as it gives you four different fletching options including Target Shooters, Compound Shooters and Overdraws, Compound Shooters and Traditional Shooters.
It is lightweight, weighing merely 2.05 lbs. With the Bitzenburger, anyone can easily fletch their arrows!
- Durable aluminium die cast construction
- Allow precision placement of feathers
- Allow accurate arrow rotation
- Keep any size of shaft centered
- Three types of clamps available: left helical, right helical, and straight
- Easy to clean off the glue
- Only one vane can be fletched at a time
- All the right, left, and straight clamps are sold separately
Fletching arrows precisely can be a tedious job and with fletchers that allow you to fletch one vane at a time, it can take too much time. Fletching about 10 to 20 arrows for your next hunting trip is about as fun as watching the grass grow. However, the Arizona E-Z Fletch is a one of a kind jig that allows you to fletch three vanes at a time.
The Arizona Rim can easily fletch up to 2.25 inches helical vanes and carbon shafts up to 5/16 inches. With the Arizona Rim, you can easily fletch arrows in a very precise and accurate manner. It lets you repair your vanes on the spot and is perfect for correcting over damaged projectiles.
For those times when smaller vanes get you into trouble, the Arizona Rim swoops in to save the day! It provides maximum helical for these smaller vanes to stabilize these vanes, ensuring the most stable and precise arrow flight.
You can easily repair one vane at a time with the E-Z Flex. However, the downside is that it can perform only one particular type of fletching for all its arrows. So, you might need to get a different configuration jig if you want a different style of fletch.
The jig is made of plastic and is not as durable. If you spill any glue on it, you have to be very careful in removing it, otherwise, you could end up damaging or scratching it.
- Fletches three vanes at a time
- Allows you to repair one fletch
- Speeds up the process
- Easy and quick to use
- Stabilizes vanes
- Provides maximum helical for smaller vanes
- Precise and accurate
- Nondurable plastic construction
- Can fletch in only one particular style
- Hard to get the glue off
When it comes to easy and fast operation, you’ll find that only a few jigs can ever compare to the Bohning Helix Tower Fletching Jig. Its fast and easy operation has made it popular for novice archers who have just started fletching their own arrows. It makes for the perfect beginner fletching jig.
The Bohning Helix Tower can easily fletch three vanes at the same time. You can place the three vanes 120 degrees apart and includes a 3 degrees helical configuration. It can hold almost any size of the shaft including a Stanard Carbon, A-Nock, F-Nock, Pin Nock, and X-bow bolts.
It can easily fit vanes up to 3.5 inches. The sturdy vertical clamp ensures that you can easily hold the heaviest of arrows on the tower. However, the fletching jig is only compatible with push in nock shafts.
The jig allows you to repair your arrows as well and it does so in a matter of seconds. These vanes can be stuck to the unit in 30-45 seconds using the super glue, making the process much faster.
However, the plastic arms take away from the durability of the structure. This makes it easy to break. Along with that, if you spill any glue on them, it will be hard to remove. You might need to get them professionally cleaned.
- Includes 3 degrees helical arms and 5 center post options
- Fist vanes up to 3.5 inches
- Fast and quick fletching process
- Allows you to fletch 3 vanes at 120 degrees
- Allows you to repair vanes as well
- Includes a sturdy vertical clamp
- Flimsy plastic construction
- Only compatible with push in nock shafts
- Not for use with feathers or wedged end arrows
If you’re looking for a quick and easy fletching solution for your arrows, then you need to look no further! The Bohnings’ Fletching Jig – Pro Class is perfect for professionals and novices alike. It is easy to use and yet it performs the fletching job perfectly. This is why it is so popular amongst archers of all skill levels.
It includes a strong permanent magnet that holds the clamp much like the Bitzenburger. This helps in holding the clamp in place while you glue the vane together. The Bohning easily accommodates shafts of all types and even allows you to choose your angle of the fletching offset.
To make the process quicker, the Bohning allows you to fletch three vanes at 120 degrees or four vanes at 90 degrees from each other. This ends up saving you a lot of time. It works either with a straight clamp or a right or left helical clamp.
It can support vanes and feather up to 5.5 inches in length. However, the jig is made of plastic, making it unreliable and unsteady. It can ruin your jig if glue falls on it as you can damage the parts while trying to remove the glue.
It includes a bunch of preset dials as well that help you with consistent fletching so all your arrows come out uniformly fletched.
- Fletches three vanes at 120 degrees or four vanes at 90 degrees
- Can be used with straight, right or left clamps
- Magnetic clamp allows easy setup
- Adjustable for all sizes of shafts
- Fletching offset angles can be easily set
- Supports 5.5 inches of vanes
- Allows for consistent fletching
- Plastic construction
- Hard to get the glue off
Nothing says quality fletching quite like the Grayling Fletching Jig. This fletching jig is perfect for those looking for a durable and sturdy fletching that can help them fletch their vanes however they want. It is preferred by professional archers as it might be hard to set up for beginners.
It can feather four vanes at a 90 degrees angle or three vanes at a 120-degree angle, both cock-feather out and cock-feather down! The Grayling jig is adjustable as it allows you to set various rotational variations.
You can easily adjust the shaft rotation up to 15 degrees, or you can set left or right offset on the nock up to 3 degrees while it allows up to 6 degrees offset in the magnet.
The Grayling is made of glass-filled nylon which is durable and gives it a superior appearance. The best part is that it is extremely easy to clean. If you are a little messy with the glue, it can be cleaned off in a matter of seconds.
The top screws on the jig can hold arrows of all sizes while the nock holder can fit arrows of all sizes as well. This means that you can use this jig for almost all kinds of arrows.
The Grayling is the perfect jig that allows you to customize various angles for maximum speed and accuracy.
- Made from durable glass nylon
- Allows you to fletch three or four vanes at a time
- Allows you to fletch arrows in both positions, cock feather out and cock- feather down
- Allows you to adjust various rotational variations
- Easy to clean the glue off it
- Can hold arrows of all sizes
- Not for beginners as it is complicated to use
- Glue dries off too quickly
If you’re all for efficient fletching, then nothing can serve you better than the Bohning Blazer Helix Fletching Jig. It is specifically designed to serve both pros and beginners. How? For starters, it allows you fletch easily and accurately while being durable at the same time. It will allow you to accurately fletch your vanes so they achieve the top speeds and a killer accuracy.
The Bohning Blazer helps you save time and energy by letting you fletch three vanes, all at once. They are set at 120 degrees apart allowing you to work on each independently. This increases the accuracy of each individual arrow.
It easily fletches vanes up to 2.25 inches apart. The setup is quite simple and easy. You only need to snap the shafts into the unit and the jig will place them 120 degrees apart. It is suitable for repair work as well and allows you to repair one arrow at a time in a matter of seconds.
It is designed for standard carbon shafts. The Bohning blazer allows you to fletch in a helical pattern, making an angle of 3 degrees. However,it is made of plastic which not durable and causes a lot of cleaning problems.
The Bohning Blazer is perfect for avid archers and hunters who look to maximize speed and accuracy of their arrows!
- Easy and accurate fletching
- Allows you to fletch three vanes at 120 degrees
- Improves accuracy and speed of arrows
- Designed for standard carbon shafts
- Allows you to repair your arrows
- Easy setup
- Nondurable plastic construction
- Hard to clean material
- Inconsistent pressure
Tired of fletching each arrow individually? Well, the BPE Pro Series Fletcher Jig is one of the best among all of them! It is specifically designed for professionals as it is user-friendly, durable and won’t break by day two. It can assist you in improving the speed and accuracy of your arrows significantly.
The BPE pro si constructed from aluminum and glass filled nylon. This makes the jig durable and sturdy, ensuring it will last you for generations. The glass filled nylon makes it easy to clean. So, if you get any glue on it, it can be cleaned easily without requiring any professional services.
The Jig can fletch 4 vanes at 90-90, 75-105 or 60-120, 3 vanes at 120, and 6 vanes at 60-60. This allows you to fletch as many arrows as you want, however you want. You can also fletch cock-out, up, down or any way you want.
The shaft clamp can easily hold any size of the shaft from 0.203 to 0.422 easily. What’s more is it can keep them perfectly centered due to the many numbered slots. It keeps the shafts steady while you fletch the vanes.
You can use either a straight, left or right helical clamp to get the desired speed and accuracy. Also included is a hardened indexing contact point that allows you to use the jig without worrying about any possible wear or tear.
- Allows you to fletch 3, 4, 5 or 6 vanes at a time
- Allows you to adjust the nock angle however you want it
- Works with a helical right, left, or straight angles
- Holds any size of the shaft from 0.203 to 0.422 inches
- Durable and sturdy construction
- Easy to clean and maintain
- Not 100% aluminum
- The clamps are a little flimsy
What is a fletching jig?
A fletching jig is a device that holds the arrow steady for you when you need to glue vanes onto it. It helps you achieve your preferred configuration without moving the arrow. Most pro archers use it to help them achieve maximum speed and accuracy.
It ensures that all the patterns you want to form are accurate. In addition to that, it makes sure the spacing between each one remains the same throughout and holds that until it dries completely.
They can also be used to repair any damaged vanes!
What are the different types of fletching jigs?
There are various types of fletching jigs out in the market. However, the one you need is determined by the number of arrows you need to fletch, the spacing between them and the fletching style. Not all fletching jigs can be used for the same type of fletching job.
Read ahead to learn about the different types of fletching jigs on the basis of style, spacing, and material.
- Straight fletching:
This is the simplest type of jig available. You can find that almost all jigs can perform straight fletching. The vanes sit straight on the arrow and the purpose is to ensure that the arrow does not spin during the flight. It is the easiest fletching to perform.
Offset fletching means that you set the vanes at a slight angle to the line of the arrow. The offset can be either left or right. This helps you increase the arrow rotation during the flight. Most jigs allow you to tweak the angle according to your preference.
Helical vanes are applied to the arrow shaft in a twisted manner and at an angle. They look like the blades of a turbine engine and can be fletched either to the left or right. The main difference between these two is that a left fletch will cause the arrow to spin clockwise while a right fletch will cause the arrow to spin counter-clockwise.
You can easily find a jig that supports both left and right helical fletching through special clamps. This type imparts even more spin to the arrow.
- Spin Wings:
These vanes are slightly curled to give even more spin to the arrow, making it deadly accurate. These are not supported by many jigs and you might need special clamps to help you get spin wings.
A very rare type of fletching style is the flu-flu. These are long sections of feathers that can be stuck on the arrow. They limit the flight distance and cause maximum drag. They can be easily fletched using any kind of jig, however, you might need to repeat the spacing in order to get the multiple vanes.
Spacing and Number
The jigs can either support 2, 3, 4, 6 or 8 vanes at a time. These can be at any angles you like. Most jigs come with pre-configured angles while some allow you to change them according to your preference. The most common types are:
- 2 at 105 degrees spacing
- 3 at 120 degrees spacing
- 4 at 90 degrees spacing
- 6 at 120 degrees spacing
These are the most common configurations.
The material of the jig is important as it determines how durable the jig is and how easy it is to clean it up.
There are two types of jig materials, each of which has their own pros and cons.
- Metal Jigs:
Metal construction is far more durable than the plastic one and has a much longer life. Cleaning them is easier as well. If you get glue onto its surface, you can easily scrub it off, without worrying about scratches.
However, they are much heavier than their plastic counterparts and can be pricey as well.
- Plastic Jigs:
Plastic jigs are lightweight and much easier to carry around. Any hunter or archer can use these on the go. They are much more inexpensive.
However, they are not very durable and tend to break apart easily. Furthermore, cleaning them is challenging as you might scratch the surface while trying to scrub off any glue.
How to Fletch Arrows:
First, you need to decide what kind of fletch you want, right or left? Or perhaps a simple straight one. Then you should decide what kind of vanes you want to use or whether you want to use feathers.
Our basic tutorial is using a Bohning Fletching Jig, you can follow the same steps for any jig.
Here are the materials you would need:
- Vanes or feathers
- Stripping tool
- Fletching Jig
- Arrow Shaft Cleaning Solution
- Remove old vanes using the stripping tool. If you are using new shafts that have no vanes, you can skip this step.
- Use an arrow shaft cleaning solution to clear away any dirt or debris. This will make a clean surface for the adhesive to bond to.
- Set the arrow shaft into the fletching jig.
- Align the shaft properly to ensure proper fletch alignment.
- Place the clamp into the vane in the proper position.
- Apply the adhesive on the vane.
- Quickly place the clamp on the shaft.
- After it dries, release the clamp from the vane. Take it out of the jig.
- Rotate the knob on the jig and move to the next position.
- Repeat the steps for all the vanes.
- Remove any excess adhesive from the shaft.
Homemade Arrow Fletching Jigs:
A homemade jig is not that hard to accomplish. However, we still recommend for truly amazing results that you use a professional one.
- Hand drill
- Tape measure
- Two wood planks
- Wood board
- Wood plug
- Measure and mark the midpoints of the two wooden planks.
- Drill a 1.5-inch hole into it.
- Cut out the top clamp part of the clipboard. Leave the wooden sides as it is.
- Measure the width of the cut clipboard and its thickness.
- Make the slots into the wooden planks just slightly thicker than the clipboard.
- Place the wooden planks on the wood board using an adhesive. Ensure they are slightly closer than the width of the clipboard.
- Cut out wooden plugs with a hole in the center. The hole in the center should be the same size as the shaft of the arrow.
- You can also cut out a knob to help you rotate the shaft.
How to Fletch Without a Jig
No professional would ever recommend you fletch your arrows without a jig. However, in those rare cases where you need to fletch your arrows and have no jig on hand, follow these simple steps to fletch without a jig.
- Wipe down the surface of the arrow with a cleaning agent.
- Place the arrow on a rest that allows you full access to all of its side. You can clamp it from the front or back.
- Next, using a protractor and scale, mark where you want your vanes to be and what style you want them to be.
- Apply super fast drying glue onto the vane.
- Apply the vane in the marked position.
- Repeat these steps for the other vanes.
How to Choose a Fletching Jig:
With so many fletching jigs available in the marketplace, how do you choose the best one for yourself? Pro archers might be aware of the finest fletching jigs, however, for beginners, the task can be quite hard. To help you out, we have compiled a completely comprehensive guide.
The construction of the jig is crucial. We already told you about the different material types and their advantages and disadvantages. We recommend professionals go with the metallic types as they will work longer. However, due to their high prices, we recommend beginners to use plastic ones as they might ruin the metallic ones as well.
Ease of Use:
Next, look for how easy it is to use the jig. Of course, customization options always look good, but those might make the machine more complicated to use. For beginners, we recommend going with jigs that have pre-set configurations. All they have to do is clamp down the vanes and rotate the knob for the next vane.
Number of Vanes:
Some jigs allow you to fix a single vane while others allow you to set up 3 or 4 at the same time. We recommend using one that allows you to fletch more vanes at a time. This makes the process easier and saves time.
Jigs are used to impart stability to the arrows while you work on the fletching. There would be no point of a fletching jig if its clamps were flimsy or if it could not support your shaft correctly. We recommend ensuring the jig can hold your arrow in quite a stable manner before making your investment. Otherwise, your vanes might come out crooked.
We saw some of the best fletching jigs on the market, however, only one can be crowned the winner! And that is the Grayling Fletching! This jig can hold 3 to 4 vanes at a time and allows you to fletch arrows in any direction you want. Its glass nylon construction ensures you can easily get the glue off without any scratches.
With the Grayling Fletching, you will hit your target every time!